In the market, we will see a lot of aluminum products. These aluminum products are not only widely used in industry, but also widely used in life. Although aluminum products are so widely used, few people have explored how it came from and how it was formed. To be honest, the formation of aluminum products needs to go through many processes, but for us, ensuring a good aluminum smelting effect is to ensure the quality of aluminum products.
How to ensure the smelting effect of aluminum products? Traditional equipment for smelting and heat treatment of aluminum always has insufficient purity, oxidation, decarburization, etc. For this, people have been committed to developing better smelting equipment. Continuous efforts have finally produced a medium-frequency induction heating power supply based on IGBT modules, which has incomparable advantages in aluminum smelting than other equipment.
We can see from the figure that aluminum is placed in a large device similar to a container. The technical term for this device is a dumping furnace, which is configured to make the smelting and heat treatment operations easier. Usually, the melting amount is above 10kg. we recommend using this device. For the smelting heat treatment of aluminum below 10kg, only the medium frequency induction heating power supply can be used.
When the medium-frequency induction heating power supply is smelting and heat-treating aluminum, thermocouples can be put into the smelting product according to requirements to detect the temperature at any time, thereby ensuring the smelting effect of aluminum, so that the smelted aluminum has no impurities and dust, and the purity is very high , which provides a good basis for the next heat treatment work.
en 
cn 
jp 
ko 
de 
es 
it 
ru 
pt 
vi 
th 
pl 
